This tutorial was written by Monti on September 6th 2009. It's concept is copyrighted to Monti. Any creation you make from my ideas are yours. You may print out this tutorial for your own personal use, but please do not copy it in any way to put online, pass out or rewrite without my permission or worse yet attempt to claim as your own.

For this tutorial you will need

Paint Shop Pro

The Following Colour Chart.
Left click and when it opens right click then save as, then open in PSP.
Of course you are free to use any colours you want.

Ok we are ready to start.

REMEMBER TO SAVE OFTEN

You can drag this arrow down the page with you to keep your place in the tut.
Script provided by Dynamic Drive.

Step 1:

We will be be making the Elephant shown below. The outlines below have been resized a lot so you can see them clearly.
I have done the outline in 2 parts, we will be starting with the top half of the elephant.
To make this easier I have numbered all pixels over 1.

Open a new image 200 x 200 transparent.
Flood fill with white so you can see what you are working on. Delete this layer at the end.
Turn the grid on so you can see the single pixels by going to View - Grid - then View - Change Grid, Guide and Snap Properties. Under Current Image Settings change the Horizontal and Vertical grids to 1.
Add a new Raster Layer and name Outline.
Select the brush tool with the following settings.
Size = 1
Hardness, Opacity and Density = 100
Zoom in to about 800% - 1000%
Change colours as you go as indicated on the outline chart. The main outline is colour 1 (#4E5258) and the toes are colour 2 (#8D858A). The eyes are Black, colour 6 (#000000) on your colour chart. I find it easier to start at the highest point, in this case one of his ears. (You can move the image later using your move tool if you need to).

Set your foreground to colour 1 on the colour chart (#4E5258) and start drawing the Elephant outline.

When you have completed that outline we will carry on with the outline below.
NOTE:
The parts shown in pink are the parts you have already drawn from the first outline.

Step 2

When all of your outline is complete, select your magic wand with the following settings and click inside the left ear.

Add a new raster layer called Fill and move this beneath your outline layer in the layer palette.

Select colour 3 (#929292) on your Elephant colour chart, click on the Fill layer to activate it and flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
V + H = 0
Opacity = 90
Blur = 15
Shadow colour = Use your Elephant outline. Colour 1 (#4E5258).
Make sure fill interior with colour is UNchecked.
Deselect.

Repeat this for the right ear making sure you select the stray pixel shown below and that you fill on the Fill layer.

Activate the outline layer and click inside both ears making sure you select the stray pixels again.
Add a new raster layer above the fill layer.
Set your Foreground to colour 4 on your colour chart (#C4C4C4)set your paint brush to Round - Size: 35
Click inside your ear to add an inner area. See below for a guide to placement.

While on the inner ear layer go to Adjust - Blur - Gaussian Blur - 4.
Deselect.
Click on the inner ear layer in the layer palette and choose Merge Down to merge it with the fill layer.

Step 3

Select your magic wand and making sure you are on the outline layer click inside head.
Select colour 3 (#929292) on your Elephant colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
V + H = 0
Opacity = 90
Blur = 18
Shadow colour = Use your Elephant outline. Colour 1 (#4E5258).
Make sure fill interior with colour is UNchecked.
Deselect.

Step 4

Select your magic wand and making sure you are on the outline layer click inside the body of the Elephant.
Make sure you select the stray pixel shown below.

Select the small body area shown below.

Step 5

Select your magic wand and making sure you are on the outline layer click inside the Elephant's left hind leg.
Select colour 3 (#929292) on your Elephant colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
V + H = 0
Opacity = 90
Blur = 9
Shadow colour = Use your Elephant outline. Colour 1 (#4E5258).
Make sure fill interior with colour is UNchecked.
Deselect.

Repeat this for the right leg making sure you fill on the Fill layer.

Step 6

Select your magic wand and making sure you are on the outline layer click inside the left foot.
Select colour 3 (#929292) on your Elephant colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
V + H = 0
Opacity = 100
Blur = 5
Shadow colour = Use your Elephant outline. Colour 1 (#4E5258).
Make sure fill interior with colour is UNchecked.
Deselect.

Repeat this for the right foot making sure you fill on the Fill layer.

Step 7

Select your magic wand and making sure you are on the outline layer click inside one of the toes.
Select colour 5 (#E4E4E4) on your Elephant colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
V + H = 0
Opacity = 85
Blur = 2
Shadow colour = Use your toe outline. Colour 2 (#8D858A).
Make sure fill interior with colour is UNchecked.
Deselect.

Repeat this for all the other toes.

Delete the White layer.

Merge all visible and save as a psp file or a png.

 HOME


This webset is NOT linkware and was designed exclusively for Monti's Pixel Playground.
DO NOT remove anything on this page without express permission from Monti ©2006-2009